SPC floor is not easy to scratch, the main reasons and characteristics can be summarized as follows:

1. Wear-resistant layer: SPC floor especially increases the wear-resistant layer, which is the most critical layer to determine the wear-resistant degree of the floor, and its thickness is usually between 0.3mm and 0.7mm. This wear-resistant layer can resist scratches in daily life, reducing the frequency of maintenance and replacement.

2. UV coating: The surface of the SPC floor is also coated with a layer of UV coating, which is a polymer coating, the main components include polyurethane, acrylic acid and other special additives. The UV coating is mainly used to protect the floor surface, further improving its scratch resistance, wear resistance and anti-fouling properties.

3. High-density substrate: The substrate of SPC floor is mixed with polyvinyl chloride (PVC) resin and stone powder, which has high density and high toughness. This substrate gives SPC flooring greater wear resistance and scratch resistance.

4. Practical application feedback: From the feedback of customers for many years, the wear resistance of SPC floor has been unanimously recognized and praised by customers. SPC floor has become the preferred floor for schools, shopping malls and other places with high wear resistance requirements.

In summary, SPC floor has excellent wear resistance and scratch resistance, and is not easy to be scratched. However, please note that although the SPC floor is abrasion resistant and scratch resistant, it is still necessary to pay attention to avoid scratches on sharp objects and scratches on heavy objects during use to extend its service life.