Methods to extend the service life of SPC flooring

First, the installation phase

1. Make sure the ground is level
- Before installing the SPC floor, ensure that the floor is fully processed to ensure that the floor flatness error is within the specified range. If the ground is not smooth, the floor will be stressed unevenly during use, and problems such as cracks and deformation will easily occur. For example, when people walk on uneven ground, some parts of the floor will be under greater pressure and may sag or bulge over time.
- Materials such as self-leveling cement can be used for leveling to provide a solid, flat foundation for the stability of the floor after installation.

2. Install it correctly
- Strictly follow the installation instructions and use the correct methods and tools. Make sure the floor splice is tight and the clasp is secure. For example, during the installation process, ensure that the buckle is completely inserted to avoid gaps, otherwise dust and moisture may enter the gaps and affect the service life of the floor.
- Avoid damage to the floor during installation, such as excessive tapping, scratching, etc. Installation personnel should be careful and use appropriate tools to prevent damage to the floor due to improper operation.

Second, the daily use stage

1. Keep it clean
- Clean the floor regularly and remove dust and debris with a soft broom or vacuum cleaner. Avoid using gritty cleaning tools to avoid scratching the floor surface. For example, cleaning the floor with a stiff brush may leave scratches on the surface and affect the appearance.
- For stains, use neutral cleaning agents and soft rags to wipe, avoid the use of strong acid, alkali and other corrosive cleaning agents, so as not to destroy the floor surface coating, reduce wear resistance and waterproof performance.

2. Prevent scratches
- Install a non-slip mat or felt mat on the bottom of the furniture to prevent it from scratching the floor when it moves. For example, when dragging a chair or sofa without a non-slip mat, the legs of the furniture may leave scratches on the floor.
- When moving heavy objects, use handling tools. Do not drag heavy objects on the floor. Otherwise, the floor may be seriously scratched and damaged.
- When entering the room, try to replace soft-soled shoes or slippers to avoid damage to the floor by hard objects such as sand and gravel in the sole. Walking on the floor in high heels or shoes with sharp objects can easily scratch the floor.

3. Control humidity and temperature
Although the SPC floor has a certain waterproof performance, it will also affect the service life in a humid environment for a long time. Keep the room well ventilated to avoid water accumulation. For example, in the bathroom, kitchen and other places that are prone to water, it is necessary to clean up the water in time to prevent infiltration of the floor.
- At the same time, avoid exposing the floor to sunlight or close to heat sources for a long time to prevent deformation due to high temperature. For example, laying a floor directly next to a heater may cause the floor to expand with heat, affecting smoothness.

4. Avoid heavy objects
- Avoid hitting or hitting heavy objects on the floor, such as dropping heavy objects. This is easy to cause local damage to the floor, affecting the overall beauty and service life. For example, accidentally dropping heavy objects on the floor may cause the floor to crack or sag.

Third, maintenance stage

1. Wax regularly
- The SPC floor can be waxed regularly to enhance wear resistance and gloss. Waxing frequency depends on the use, generally every six months to once a year. Waxing creates a protective film on the surface of the floor, reducing wear and scratches.

2. Repair it promptly
- If the floor is found to have minor damage or scratches, it should be repaired in time. It can be treated with floor repair agent or professional repair tool to avoid the expansion of the problem. For example, small scratches can be filled and polished with a restorative to restore them to their original state.

3. Avoid chemical attack
- Avoid floor contact with paint, solvents and other chemicals. If accidentally stained, clean up in time. These chemicals can corrode the floor surface coating, affecting performance and service life.

In short, taking the correct method at all stages of installation, daily use and maintenance can effectively extend the service life of SPC floor, so that the floor always remains beautiful and durable.