SPC floor has always been praised for its "water is not afraid of" strong waterproof performance, but this does not mean that you can let it go after soaking in water. In case of flood irrigation, SPC floor also needs your timely "first aid" in order to avoid long-term "health hazards". Here is a look at how to properly deal with the embarrassing scene of SPC floor soaking water with the most elegant posture, so that it continues to laugh proudly!

1. Quickly clean up the water, don't let it take the opportunity to make trouble
  First of all, don't let the water "enjoy". Although the SPC floor is not afraid of water, if it is left unchecked for a long time, near the corners or kicklines, it is inevitable that some "narrow-minded" water wants to exploit the hole. You just need to immediately pick up the absorbent mop or dry towel, quickly absorb the water on the surface of the floor, and don't leave them a little chance to "mess up."

2. Remove the badly damaged floor plate and give it "air"
  If the water has successfully "penetrated" the cracks in the floor, affecting part of the floor plate, then a little "tough" action is  needed. The latch splicing of the SPC floor makes disassembly simple and easy, removing those heavily flooded floor plates and checking for water underneath. You will be surprised to find that they are really "obedient", just need to dry the water under them, let them breathe, and then reinstall it, everything is back to normal.

3. Cables for the fan and dehumidifier are used to fully drain moisture
  Even the most waterproof floor can not withstand a long time of wet environment "entanglement". At this point, you can open the window and let the air flow freely; If the weather doesn't help, fans and dehumidifiers will step in to help speed up drying. No matter the wind and rain, as long as there is enough wind, the moisture will naturally retreat!

4. Don't forget to check the bottom line to eliminate worries
  SPC floor can face the "water army" alone, but if the base below it is wood or other moisture prone material, then you have to be careful. Damp base may affect the stability of the floor, causing loosening or deformation in subsequent use. Therefore, quickly open and check whether the basic level is OK, if necessary, it should be repaired and replaced, and do not leave a pit for the future.

5. Clean seams, don't leave a chance for dirt
  After soaking in water, the joints of the floor may contain dirt, which affects the appearance and will shorten the service life. Pick up the vacuum cleaner or rag and clean the joint to ensure that it is clean and comfortable! Check carefully after cleaning to ensure that the joints are dry and free of moisture.

6. Regular inspection to prevent floor "denaturation"
  Although the waterproof performance of SPC floor is strong, long-term immersion may also make it slightly "denatured". So for a few days after soaking in the water, remember to keep an eye on the state of the floor: is there any warping, loosening, or abnormal joints? As long as the problem is found, immediate measures are taken to replace the damaged floor plate in time, so as not to turn the small problem into a big trouble.

7. Sterilize and remove bacteria, don't let the smell find the door
  If the water source is not clean, don't forget the last step: thorough cleaning and disinfection. A mild disinfectant paired with a clean cloth can easily eliminate bacteria growth and odors. After cleaning, wipe the floor again with a dry cloth to make the floor shiny as new!

To summarize:
  Although the SPC floor is "not afraid of water", you can not rely on it to heal yourself after soaking in water. By quickly removing standing water, ventilation and drying, and checking the floor structure, you can greatly reduce the damage caused by soaking water and ensure that the floor will continue to withstand future wind and rain challenges. If properly handled, the impact of soaking water is minimized, SPC floor is still the tough and durable, waterproof and reliable "floor hero"!